Head to head
Barreto Manufacturing 2036TKH-4MS vs DeWalt DCS7485
The Barreto Manufacturing 2036TKH-4MS is a ride-on hydraulic tracked trencher. The DeWalt DCS7485 is a 54v xr flexvolt 210 mm cordless table saw.
Last reviewed 13 September 2026
Specifications side by side
| Barreto Manufacturing 2036TKH-4MS | DeWalt DCS7485 | |
|---|---|---|
| Weight | 678kg | 22kg |
| Engine | Honda GX630, 688cc, 20hp | - |
| Dig depth | 60cm, 76.5cm or 91.8cm (24", 30", 36") | - |
| Trench width | 6 inch (152mm) chain | - |
| Chain speed | 826.2 metres/min | - |
| Dimensions | 275.4cm long x 90.5cm wide x 143.3cm high | - |
| Cut depth at 90 deg | - | 65mm |
| Rip capacity | - | 610mm |
| Voltage | - | 54V |
Sources: Barreto Manufacturing 2036TKH-4MS, DeWalt DCS7485. Figures vary by model year and options, so check with the supplier before you commit.
Buy or hire the 2036TKH-4MS if...
A ride-on tracked trencher for utility and drainage contractors digging cable or pipe runs across gardens and soft ground. The tracked, hydraulic design keeps ground damage down compared with a wheeled trencher of similar depth.
Listed by
- The Hire Supply Co UK Ltd - London
Buy or hire the DCS7485 if...
A cordless table saw for sites without a mains supply. Used by carpenters and fitters for ripping and cross-cutting sheet material and timber.
Full DCS7485 specifications →Common questions
What is the difference between the Barreto Manufacturing 2036TKH-4MS and the DeWalt DCS7485?
The Barreto Manufacturing 2036TKH-4MS is a ride-on hydraulic tracked trencher; the DeWalt DCS7485 is a 54V XR FLEXVOLT 210 mm cordless table saw.
GetBrent is an independent directory and is not a dealer for, nor affiliated with, either manufacturer. Model and brand names are the trademarks of their owners.