GetBrent

Head to head

Gledhill Stainless Lite Plus 150 vs Grant Aerona3 R32 10kW

The Gledhill Stainless Lite Plus 150 is a indirect unvented hot water cylinder, 150 litres. The Grant Aerona3 R32 10kW is a r32 inverter driven air source heat pump, 10 kw heat output.

Last reviewed 13 September 2026

Specifications side by side

Gledhill Stainless Lite Plus 150Grant Aerona3 R32 10kW
Dimensions1118 mm high x 550 mm diameter882 x 874 x 405 mm (H x W x D)
Weight26 kg empty, 174 kg full70 kg
Capacity150 litres-
Heat-up time25 minutes-
Relief valve setting6 bar and 95C-
Immersion heater3kW incoloy immersion, back-up-
ErP ratingB-
Heat output-10 kW
SCOP-5.20 (35C flow), 3.47 (55C flow)
Refrigerant-R32
Warranty-7 years when installed by a Grant G1 accredited installer

Sources: Gledhill Stainless Lite Plus 150, Grant Aerona3 R32 10kW. Figures vary by model year and options, so check with the supplier before you commit.

Buy or hire the Stainless Lite Plus 150 if...

A 150 litre indirect cylinder from Gledhill's Stainless Lite Plus range, sized for a small to medium house. Its corrugated coil reheats in about 25 minutes, and the range carries a 25 year guarantee on the cylinder body.

Full Stainless Lite Plus 150 specifications →

Buy or hire the Aerona3 R32 10kW if...

A 10kW R32 inverter driven heat pump from Grant's Aerona3 range, a common choice for off-gas-grid homes that previously ran an oil boiler. It carries a 7 year warranty through Grant's G1 installer scheme, one of the longer standard terms in this category.

Full Aerona3 R32 10kW specifications →

Common questions

What is the difference between the Gledhill Stainless Lite Plus 150 and the Grant Aerona3 R32 10kW?

The Gledhill Stainless Lite Plus 150 is a indirect unvented hot water cylinder, 150 litres; the Grant Aerona3 R32 10kW is a r32 inverter driven air source heat pump, 10 kW heat output.

GetBrent is an independent directory and is not a dealer for, nor affiliated with, either manufacturer. Model and brand names are the trademarks of their owners.