GetBrent

Head to head

Stertil-Koni ST1075 vs Twin Busch TWS3-10E

The Stertil-Koni ST1075 is a mobile column lift for heavy vehicles, sold and used in sets. The Twin Busch TWS3-10E is a 3 tonne low-rise mobile scissor lift.

Last reviewed 13 September 2026

Specifications side by side

Stertil-Koni ST1075Twin Busch TWS3-10E
Lifting capacity16,500 lbs (7,484 kg) per column3000 kg
Lifting heightmax 73in (1854 mm), automatic stop at highest position1000 mm
Motor power3-4 hp per column depending on variant2.2 kW
Weightapprox. 1255 lbs (569 kg) per column, wireless modelapprox. 500 kg
Lift time75 seconds-
Column height97in (2464 mm)-
Drive-on height-110 mm
Lift/lower time-approx. 20 seconds each way
Supply-230V or 400V, 16A fuse

Sources: Stertil-Koni ST1075, Twin Busch TWS3-10E. Figures vary by model year and options, so check with the supplier before you commit.

Buy or hire the ST1075 if...

A mobile column lift used in sets of two, four or more under trucks, buses and other heavy vehicles, each column rated at up to 7.5 tonnes. Columns raise a vehicle to nearly 1.9 metres in about 75 seconds and stop automatically at height. Suits a commercial vehicle or fleet workshop rather than a car garage.

Full ST1075 specifications →

Buy or hire the TWS3-10E if...

A mobile low-rise scissor lift raising 3 tonnes to 1 metre in around 20 seconds, with a low 110mm drive-on height and lockable access ramps. It needs no compressed air, running on an electromagnetic release instead. Suits a garage that wants a movable lift rather than a fixed two-post installation.

Full TWS3-10E specifications →

Common questions

What is the difference between the Stertil-Koni ST1075 and the Twin Busch TWS3-10E?

The Stertil-Koni ST1075 is a mobile column lift for heavy vehicles, sold and used in sets; the Twin Busch TWS3-10E is a 3 tonne low-rise mobile scissor lift.

GetBrent is an independent directory and is not a dealer for, nor affiliated with, either manufacturer. Model and brand names are the trademarks of their owners.