Model against model
Ifor Williams GX126 vs Ifor Williams LM146
Two models people put on the same shortlist. Every figure below is sourced, and where one side has a specification the other does not publish, the row is left out rather than filled with a guess.
Last reviewed 13 September 2026
| Ifor Williams GX126 | Ifor Williams LM146 | |
|---|---|---|
| Overall length | 5.70m | 5.60m |
| Overall width | 2.30m | 2.10m |
| Gross weight | 3500kg | 3500kg |
| Unladen weight | 765kg (Skids); 795kg (Ramp) | 735kg |
| Payload | 2735kg (Skids); 2705kg (Ramp) | 2765kg |
| Tyres | 155/70R12C | 195/60R12C |
Only specifications published for both models appear here. Full Ifor Williams GX126 figures and full Ifor Williams LM146 figures.
Choose the GX126 if...
The GX126 is Ifor Williams' mainstream plant trailer for mini diggers, dumpers and similar machinery on a single-axle-per-side, 3500kg braked chassis. Hirers usually pick the Ramp version for self-loading and the Skids version where a separate loading ramp or forklift is already available.
Full specifications →Choose the LM146 if...
The LM146 is a general-purpose flatbed aimed at landscaping, construction and plumbing trades that need a long, wide load bed with a high payload on a single 3500kg-braked chassis. It is used where loads are bulky or awkwardly shaped rather than plant machinery, which typically goes on the ramped GX range instead.
Full specifications →Common questions
What is the difference between the Ifor Williams GX126 and the Ifor Williams LM146?
Ifor Williams GX126: The GX126 is Ifor Williams' mainstream plant trailer for mini diggers, dumpers and similar machinery on a single-axle-per-side, 3500kg braked chassis. Hirers usually pick the Ramp version for self-loading and the Skids version where a separate loading ramp or forklift is already available. Ifor Williams LM146: The LM146 is a general-purpose flatbed aimed at landscaping, construction and plumbing trades that need a long, wide load bed with a high payload on a single 3500kg-braked chassis. It is used where loads are bulky or awkwardly shaped rather than plant machinery, which typically goes on the ramped GX range instead.
Are these figures reliable?
Every figure on this page was read off a manufacturer or established dealer page and is linked to its source. Anything we could not verify is left out rather than estimated. Specifications change by model year and configuration, so confirm with the supplier before relying on them.
GetBrent is an independent directory and is not a dealer for, nor affiliated with, either manufacturer. Model and brand names are the trademarks of their owners.