Head to head
Sealey 1153CX vs Sealey WB10
The Sealey 1153CX is a 3 tonne long reach heavy-duty trolley jack. The Sealey WB10 is a semi-automatic wheel balancer.
Last reviewed 13 September 2026
Specifications side by side
| Sealey 1153CX | Sealey WB10 | |
|---|---|---|
| Weight | 19 kg | 128 kg |
| Lifting capacity | 3 tonnes | - |
| Min saddle height | 140 mm | - |
| Max saddle height | 432 mm | - |
| Max chassis height | 165 mm | - |
| Length | 625 mm | - |
| Warranty | 1 year | - |
| Max wheel weight | - | 70 kg |
| Max rim diameter | - | 28in |
| Max rim width | - | 20in (510 mm) |
| Motor power | - | 90 W |
| Supply | - | 230V single phase |
| Balance accuracy | - | +/- 1g |
| Rotating speed | - | 140 rpm |
| Dimensions | - | 1100 x 1000 x 1250 mm |
Sources: Sealey 1153CX, Sealey WB10. Figures vary by model year and options, so check with the supplier before you commit.
Buy or hire the 1153CX if...
A 3 tonne trolley jack with a long reach chassis for jacking points set further back on a vehicle, and overload protection built in. Its low 140mm minimum saddle height suits lower cars as well as vans. Covered by Sealey's 1 year guarantee.
Full 1153CX specifications →Buy or hire the WB10 if...
A semi-automatic wheel balancer with auto data input for offset and wheel diameter, taking rims up to 28 inches. Balancing takes about 7 seconds per wheel at 140rpm. Suits a garage wanting a simple balancer alongside a tyre changer rather than a fully automatic setup.
Full WB10 specifications →Common questions
What is the difference between the Sealey 1153CX and the Sealey WB10?
The Sealey 1153CX is a 3 tonne long reach heavy-duty trolley jack; the Sealey WB10 is a semi-automatic wheel balancer.
GetBrent is an independent directory and is not a dealer for, nor affiliated with, either manufacturer. Model and brand names are the trademarks of their owners.