Model against model
Yanmar ViO17 vs Yanmar ViO20-6
Two models people put on the same shortlist. Every figure below is sourced, and where one side has a specification the other does not publish, the row is left out rather than filled with a guess.
Last reviewed 13 September 2026
| Yanmar ViO17 | Yanmar ViO20-6 | |
|---|---|---|
| Operating weight | 1,830 kg | 2,125 kg (4,685 lb) (rubber track, canopy) |
| Dig depth | 2,410 mm (blade lowered); 2,310 mm (blade lifted) | 2,410 mm (94.9 in) (blade down) |
| Engine power | 10.1 kW at 2,200 rpm | 15.0 kW (20.1 hp) at 2,400 rpm |
Only specifications published for both models appear here. Full Yanmar ViO17 figures and full Yanmar ViO20-6 figures.
Choose the ViO17 if...
The Yanmar ViO17 is a true zero tail swing mini excavator built for working tight to walls, fences and parked vehicles without the counterweight overhanging, a common requirement on UK residential and urban groundworks jobs. It sits in the same roughly 1.7-1.9 tonne hire class as the Takeuchi TB216 and Kubota KX019-4. Yanmar's compact equipment range is less widely stocked across UK hire fleets than Kubota or JCB, but it has a following among contractors who rate its digging force for its size.
Full specifications →Choose the ViO20-6 if...
The Yanmar ViO20-6 steps up from the ViO17 into the roughly 2 tonne mini excavator class, still with Yanmar's true zero tail swing geometry for working in confined spaces. It competes with the Caterpillar 301.7 CR and similarly sized Kubota and Takeuchi machines for UK groundworks and utility hire jobs. Its fixed rather than variable undercarriage keeps the design simpler than some rivals, at the cost of not being able to narrow down for transport.
Full specifications →Common questions
What is the difference between the Yanmar ViO17 and the Yanmar ViO20-6?
Yanmar ViO17: The Yanmar ViO17 is a true zero tail swing mini excavator built for working tight to walls, fences and parked vehicles without the counterweight overhanging, a common requirement on UK residential and urban groundworks jobs. It sits in the same roughly 1.7-1.9 tonne hire class as the Takeuchi TB216 and Kubota KX019-4. Yanmar's compact equipment range is less widely stocked across UK hire fleets than Kubota or JCB, but it has a following among contractors who rate its digging force for its size. Yanmar ViO20-6: The Yanmar ViO20-6 steps up from the ViO17 into the roughly 2 tonne mini excavator class, still with Yanmar's true zero tail swing geometry for working in confined spaces. It competes with the Caterpillar 301.7 CR and similarly sized Kubota and Takeuchi machines for UK groundworks and utility hire jobs. Its fixed rather than variable undercarriage keeps the design simpler than some rivals, at the cost of not being able to narrow down for transport.
Are these figures reliable?
Every figure on this page was read off a manufacturer or established dealer page and is linked to its source. Anything we could not verify is left out rather than estimated. Specifications change by model year and configuration, so confirm with the supplier before relying on them.
GetBrent is an independent directory and is not a dealer for, nor affiliated with, either manufacturer. Model and brand names are the trademarks of their owners.